Oil Replacement Procedure - Suzuki RM85 Owner's Service Manual

17-6 REAR SUSPENSION

OIL REPLACEMENT PROCEDURE

TOOLS AND EQUIPMENT
• Following tools and equipment are required to perform oil
replacement.
OIL REPLACEMENT PROCEDURE
• Remove the rear shock absorber unit from the frame. Clean
and dry it. (17-3)
• Remove the spring from the rear shock absorber unit.
(17-4)
NOTE:
Inspect the rear shock absorber unit for oil leak.
Turn the rebound damping force adjuster screw counterclock-
wise until it stops, so that the rear suspension oil can be poured
easily.
• Remove the valve cap. Press the valve with a screwdriver to
bleed out nitrogen gas.
Releasing high pressure gas from the rear shock
absorber unit can be hazardous.
Never perform any servicing until the nitrogen gas
pressure has been released from the rear shock
absorber unit. When releasing the gas pressure, place
a rag over the gas valve and use the tip of a screw-
driver etc. to press the valve. Do not use your finger to
depress the gas valve, and direct the valve away from
your face and body.
85
 WARNING
1 Screwdriver or small punch
2 Vise*
3 Drain Pan
4 Oilcan
5 Beaker
6 Specified Shock Oil (SS25)
7 Rags
8 Nitrogen tank
9 Filler Hose and Nozzle
0 Regulator Assembly
A Owner's Service Manual
* Not Shown in the illustration