Installation Options; Wall Mounting - AT&T 1856 Quick Start Manual

Speakerphone/answering system with caller id/call waiting

Hide thumbs Also See for 1856:

Getting started

Installation options

NOTE: The mounting bracket must be used for both tabletop use and wall

installation options

Tabletop mount

The telephone base comes with the bracket mounted for tabletop use. If wall

mounting is desired, a telephone outlet wall mounting plate with mounting studs is

required. This mounting plate with studs may be available for purchase from many

hardware or consumer electronics retailers and may require professional installation.

. Hold down the switch hook on the telephone base, then slide the handset tab

upwards to remove it from the slot. Rotate the handset tab 80 degrees. Push

the handset tab down into the grooves so it settles into position.

To remove the bracket, hold the telephone base in both hands, press the two

bracket tabs and lift the bracket away from slots

Telephone outlet mounting

plate with mounting studs.

and .

Wall mount

Table of Contents