Overheat Warning Indicator - Yamaha WaveRunner GP800R Service Manual

– +
ELEC
YAMAHA
8
MPH
HOUR
7
6
5
4
3
2
1
x1000r/min
5
INDICATION SYSTEM
FUEL
MULTI
DISPLAY
WARNING
6

Overheat warning indicator

1. Check:
Overheat warning indicator
Not operating → Replace the multi-
function meter.
NOTE:
When inspecting the multifunction meter
unit or emptying the fuel tank, connect the
white/blue and black terminals (green
two-pin connector) with a jumper lead 1
to prevent the fuel warning indicator from
being activated.
When inspecting the multifunction meter
unit or emptying the oil tank, connect the
blue and black terminals (white two-pin
connector) with a jumper lead 2 to pre-
vent the oil warning indicator from being
activated.
Checking steps:
Supply DC 12 voltage to the white
four-pin connector (+: red, –: black)
with a battery.
Connect the green and red terminals
with a jumper lead 3.
Connect the pink and black terminals
with a jumper lead 4.
Make sure the water temperature sym-
bol 5 and "WARNING" lamp 6
blinks, and the buzzer sounds intermit-
tently.
7-35
E