Oil Level Gauge - Yamaha WaveRunner GP800R Service Manual

Hide thumbs Also See for WaveRunner GP800R:
Table of Contents

Advertisement

+
ELEC
YAMAHA
8
MPH
HOUR
7
6
5
4
3
2
1
x1000r/min
4
INDICATION SYSTEM
FUEL
MULTI
DISPLAY
WARNING
5

Oil level gauge

1. Check:
Oil level gauge
Not operating → Replace the multi-
function meter.
NOTE:
When inspecting the multifunction meter
unit or emptying the fuel tank, connect the
white/blue and black terminals (green two-
pin connector) with a jumper lead 1 to pre-
vent the fuel warning indicator from being
activated.
Checking steps:
Supply DC 12 voltage to the white
four-pin connector (+: red, –: black)
with a battery.
Disconnect the white two-pin connec-
tor (blue and black leads).
Connect the blue and black terminals
with a jumper lead 2.
Connect the green and red terminals
with a jumper lead 3.
NOTE:
If the jumper lead is installed for more
than 30 seconds, the display will auto-
matically turn off.
Remove the jumper lead 2 from the
white two-pin connector.
Disconnect the jumper lead 3 and
then connect it to green and red ter-
minal again.
Make sure the oil symbol 4 and
"WARNING" lamp 5 blinks, and the
buzzer sounds intermittently.
7-34
E

Advertisement

Table of Contents
loading

Table of Contents