FUEL
a
CARBURETOR UNIT
a
SERVICE POINTS
Throttle valve synchronization inspection
and adjustment
1. Check:
Throttle valve synchronization
Different clearances → Adjust.
Checking steps:
Loosen the throttle stop screw 1 until
untouched the screw end from the
throttle lever.
Check the each throttle valve is fully
closed a.
2. Adjust:
Throttle valve synchronization
Adjustment steps:
Loosen the throttle stop screw 1 until
untouched the screw end from the
throttle lever.
Loosen the screws 2.
NOTE:
Make sure that the throttle valves are in
the fully closed position.
Tighten the screws 2.
Screw:
2 N • m (0.2 kgf • m, 1.4 ft • lb)
Turn in the throttle stop screw to the
original position.
4-18
E