WILSON AUDIO Mezzo Owner's Manual page 79

7. Place the driver into the machined recess.
8. Replace the screws, tightening them to 30 inch/pounds of torque.
Note: The bolts used to attach the drivers to the baffle are tightened at the fac-
tory using a digital torque wrench. The recommended torque for the allen-head
bolts for each of the drivers is 35 inch-lb. The Maximum bolt torque is 37 inch-
lb.
W i l s o n A u d i o S p e c i a l t i e s
S 8 . 1 — R
E C T I O N
P
E P A I R R O C E D U R E S
79