Advertisement
Note: Before setting up the Mezzo, study carefully Section 3, "In Your Room." It pro-
vides valuable information on determining the ideal room location for your speakers.
Section 4.1—Final Setup
Preparation
You will need the following items:
• Supplied hardware kit
• Tape measureKnown listening position
Your dealer is trained in the art and science of the Wilson Audio Setup Procedure
(WASP) outlined in Section 3, and Wilson Audio recommends dealer installation of your
new loudspeaker.
Section 4.2—Mezzo Spikes
The Mezzo comes with hardware necessary to properly spike it to the floor. This will
allow the speaker to be tilted to a variety of angles. These spikes also provide acoustical
isolation as well as optimal height placement for your speakers. There are three ways of
assembling the spikes (without diodes, without spacers, or with one or t wo spacers), and
your choice will depend on the location of the Mezzo and personal tastes. While the Mez-
zo baf fle is designed such that the front baf fle is angled upward toward the listener, the
spacers are provided to allow for additional rotation of the Mezzo, such as for installations
where the listening position is close to the loudspeakers. If the speaker is floor mounted,
additional upward tilt may be desirable so the drivers are firing towards the listener. If the
speaker is mounted above the listening ear height, it will need to be raised more in the
back so the speaker is firing down toward the listener.
Af ter determining the required rotation for the Mezzo, Sections 4.3- 4.6, assemble the
W i l s o n A u d i o S p e c i a l t i e s
S
4 . 1 — F
E C T I O N
S
I N A L
E T U P
39
Advertisement
