Table of Contents
Advertisement
Section 3 – OMNI-VII REAR
PANEL
(30) SPKR
This jack is for connection of an external
speaker. When connected using a standard
1/4" phone plug, the internal speaker in
OMNI-VII s disabled. Tip of the 1/4" phone
plug is audio, sleeve is ground.
Requirements for an external speaker
connected to OMNI-VII is minimum 4 watts
power handling, 4 ohms minimum
impedance.
588 manual
Part #74409
Printed in USA
(31) ACC 1
Figure 3-1 ACC 1 jack pin-out diagram
The ACC 1 jack is an 5-pin DIN receptacle
used for interfacing accessory device
requiring audio in/out connections, FSK
connections and/or an auxiliary PTT input.
A 5-pin DIN accessory cable, (p/n 46176)
has been provided as part of the OMNI-VII
packing kit for easier connection of the ACC
Second release – August 2007
16
Advertisement
Table of Contents
