Table of Contents
Advertisement
Quick Links
200 PSI FAST-FILL
AIR SOURCE KIT
55% Duty Compressor on
2.0 Gallon Air Tank
PART NO. 20007
IMPORTANT:
It is essential that you and any other operator of this
product read and understand the contents of this
manual before installing and using this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
*Only Compressor
USER MANUAL
is CE Certified
Advertisement
Table of Contents
Related Manuals for VIAIR 20007
Summary of Contents for VIAIR 20007
- Page 1 200 PSI FAST-FILL AIR SOURCE KIT 55% Duty Compressor on 2.0 Gallon Air Tank PART NO. 20007 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product.
-
Page 2: Important Safety Instructions
200 PSI FAST-FILL AIR SOURCE KIT IMPORTANT SAFETY INSTRUCTIONS: CAUTION: To reduce risk of electrical shock or electrocution: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs. - Do not use this product in or area where it can fall or be pulled into water or other liquids. -
Page 3: Installation
200 PSI FAST-FILL AIR SOURCE KIT INSTALLATION: Please read and follow the Installation Instructions carefully to avoid injury or damage to the compressor or your vehicle. Selecting a Mounting Location: The selection of a proper mounting location for your air source kit will help ensure a long and trouble free service life. -
Page 4: Mounting And Wiring
200 PSI FAST-FILL AIR SOURCE KIT MOUNTING AND WIRING: 1. Disconnect ground cable from vehicle’s battery. 2. Temporarily position the air source kit in the location where it will be mounted. 3. R oute ground wire to the negative post of the battery or to an appropriate grounding point and cut ground wire to length as needed. 4. M ount air source kit at tank leg mounts with the four grommets, and four sets of bolts, nuts, washers, and locking washers provided. Use of thread sealant... -
Page 5: Operating Instructions
200 PSI FAST-FILL AIR SOURCE KIT OPERATING INSTRUCTIONS: 1. IMPORTANT: Always operate the compressor BELOW the MAXIMUM PRESSURE RATING of the compressor. Please refer to Application & Specifications Sections of this manual for details. 2. A lways observe the MAXIMUM DUTY CYCLE of the air compressor. Refer to Compressor Applications and Specifications Section of this manual for details. Operation exceeding maximum pressure ratings and or duty cycle will result in damage to air compressor. 3. Y our air compressor is equipped with an AUTOMATIC THERMAL OVERLOAD PROTECTOR. This feature is designed to protect the air compressor from overheating causing permanent damage to your air compressor. The thermal overload protector will automatically cut off power to your air compressor should the internal operating temperature of the air compressor rise above safe levels... - Page 6 200 PSI FAST-FILL AIR SOURCE KIT AIR TANK PRECAUTIONS: IMPORTANT: a. T he air source kit air tank is rated for 200 PSI maximum working pressure. Do not overfill. Overfilling may result in death or serious injury. b. Tank is not to be used as a breathing device. c. Always wear ANSI approved safety glasses when operating air tank. d. Bleed pressure from tank after each use, and before servicing or adding attachments. DRAIN TANK OFTEN TO REMOVE CONDENSATE. FAILURE TO DRAIN TANK WILL ALLOW TANK TO RUST INTERNALLY. a. To remove any accumulated condensation inside the tank, bleed pressure from tank until pressure is approximately 5 PSI to 20 PSI.
-
Page 7: Specifications
200 PSI FAST-FILL AIR SOURCE KIT COMPRESSOR APPLICATION GUIDE: ABOUT COMPRESSOR DUTY CYCLE: Compressor Duty Cycle refers to amount of time a compressor can be operated in a given time period, at 100 PSI & at a standard ambient temperature of 72°F. Duty Cycle is commonly expressed as: Compressor On Time / (Compressor On Time + Off Time) As an example, a compressor that is rated for 20% duty cycle means that compressor can be operated at 100 PSI @ 72°F for 8 Minutes and rested for 32 Minutes. 8 min. on / (8 min. on + 32 min. off) = 20% Duty Cycle DUTY CYCLE REFERENCE CHART DUTY CYCLE @100PSI / 72°F MINUTES ON / OFF 15% 6 Min. On / 34 Min. Off 17% 7 Min. On / 30 Min. Off 20% 8 Min. On / 32 Min. Off 22% 9 Min. On / 30 Min. Off 25% 10 Min. On / 30 Min. Off 30%... -
Page 10: Limited Warranty
200 PSI FAST-FILL AIR SOURCE KIT LIMITED WARRANTY: VIAIR Corporation warrants this product, when properly installed and under normal conditions of use, to be free from defects in workmanship and materials for a period of one year from its original date of purchase. To receive warranty service or repair, please contact VIAIR Corporation. Returns should be made within one year of the date of purchase, after a Return Goods Authorization (RGA) number has been assigned by VIAIR Corporation. To obtain RGA, fax a copy of your receipt to (949) 585-0188. For complete warranty details, please visit: www.viaircorp.com/warranty PLEASE NOTE: THIS WARRANTY COVERS PRODUCT DEFECTS ONLY; IT DOES NOT COVER INCIDENTAL OR CONSEQUENTIAL DAMAGES AS RESULT OF MISUSE OR ABUSE. 15 EDELMAN • IRVINE, CA 92618 TEL: (949) 585-0011 • FAX: (949) 585-0188 www.viaircorp.com USER MANUAL...