VIAIR 20008 User Manual

MODEL NUMBER:
20008 – 200 PSI
AIR SOURCE KIT 200 PSI
Compressor on 2.0
Gallon 200 PSI Air Tank
IMPORTANT:
It is essential that you and any other
operator of this
understand the contents of this manual
before installing and using this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
USER MANUAL
product read and

IMPORTANT SAFETY INSTRUCTIONS

CAUTION - To reduce risk of electrical
shock or Electrocution:
Do not disassemble. Do not attempt repairs or
•
modifications. Refer
agencies for all service and repairs.
Do not use this product in or area where it can
•
fall or be pulled into water or other liquids.
Do not reach for this product if it has fallen into
•
liquid.
Use this compressor with 12-volt DC systems only.
•
This product should never be left unattended
•
during use.
WARNING - To prevent injuries:
Never allow children to operate this compressor.
•
Close supervision
compressor is being used near children.
This compressor will become very hot during and
•
immediately after use. Do not touch any part of
this compressor with bare hands other than the
ON/OFF switch during and immediately after use.
Do not use this product near flames or explosive
•
materials or where aerosol products are being used.
Do not operate this product where oxygen is
•
being administered.
Do not pump anything other than atmospheric air.
•
Never use this product while sleepy or drowsy.
•
Do not use any tools or attachments without
•
first determining maximum air pressure for that
tool or attachment.
Never point any air nozzle or air sprayer toward
•
another person or any part of the body.
This air compressor is equipped with an
•
Automatic Reset Thermal Protector, and can
automatically restart after the thermal protector
resets. Always cut off power source when
thermal protector becomes activated.
Wear safety glasses
•
operating this product.
Use only in well ventilated areas.
•
to qualified service
is necessary when this
or goggles when