Table of Contents

Advertisement

22 LT-R450/ZK9 ('09-MODEL)

REMOVAL

• Remove the front fender. (LT-R450K8 7-6)
• Remove the fuel tank and fuel tank lower cover.
(LT-R450K8 5-4)
• Remove the rubber cap 1.
• Disconnect the fuel injector coupler 2, IAP sensor coupler 3
and TP sensor coupler 4.
• Remove the throttle cable cover 5.
• Disconnect the throttle cable from drum.
After disconnecting the throttle cables, do not snap
the throttle valve from full open to full close. It may
cause damage to the throttle valve and throttle body.
• Loosen the throttle body clamp screws and move the throttle
body assembly upward.
• Disconnect the starter cable from the throttle body assembly.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lt-r450z2009 lt-r450z

Table of Contents