Electrolux Affinity Service And Diagnostics page 52

4. Softener Compartment Test: Turn the program knob three positions clockwise from the
start position. This will activate the bleach and wash water solenoids and cold water will
enter the softener compartment. This test will check the function of the wash solenoid as
well as checking the functionality of the softener compartment.
5. Door Lock Test: Turn the program knob four positions clockwise from the start position.
The door lock solenoid will open, allowing the technician to open the door. This test will
check the function of the door lock assembly, as well as the interior light.
6. Movement Test: Turn the program knob five positions clockwise from the start position.
This will fill the washer with water and start a tumbling action. Once the tumbling action
has started, the heater will turn on (if equipped). The purpose of this test is to check the
operation of the motor, motor control, water level switch, and heater (if equipped).
7. Drain and Spin Test: Turn the program knob six positions clockwise from the start position.
This test will activate the drain pump, as well as activate the door lock solenoid, allowing
the machine to start a high speed spin cycle. This test checks the drain pump, motor
control, motor, and door lock.
List of Tests