Connecting To A Pc - Panasonic HDC-MDH1 Operating Instructions Manual

With a PC
2
Setup
≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
1
Connect this unit to the AC adaptor.
≥ It is possible to use it connected to the PC with the batteries only, but you will not be able to
write data into the unit.
2
Turn on the unit.
≥ This function is available in all modes.
3
Connect this unit to a PC.
≥ The USB function selection screen will appear.
4
Touch [PC] on the screen of this unit.
≥ The Smart wizard screen is automatically displayed when HD Writer AE 2.5S is installed.
≥ This unit is automatically recognised as an external drive of the PC. (l 94)
≥ When you select an option other than [PC], reconnect the USB cable.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
92
VQT2Z66

Connecting to a PC