Panasonic HDC-MDH1 Operating Instructions Manual page 40

[QUICK POWER ON]
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to or
≥ Depending on the recording conditions, start time may be longer than 1 second.
≥ In the quick power on mode, the zoom magnification becomes 1k.
[REC LAMP]
The recording lamp lights up during recording. When this is set to [OFF], it does not light
during recording.
[ALERT SOUND]
Touch screen operation, start and stop of recording and unit on/off can be confirmed with this
sound.
(Volume low)/
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l 99)
[LCD SET]
It adjusts brightness and colour density on the LCD monitor.
≥ These settings will not affect the images actually recorded.
1 Select [LCD SET] using the cursor button and press the button in the centre.
2 Select the desired setting item and press the button in the centre.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOUR]:
Colour level of the LCD monitor
3 Adjust settings using the cursor button
right or left.
4 Select [ENTER] and press the button in the
centre.
≥ Select [EXIT] and press the button in the centre or press the MENU button to exit the menu
screen.
[EVF SET]
It adjusts the brightness of the viewfinder.
≥ These settings will not affect the images actually recorded.
1 Select [
EVF SET
2 Adjust settings using the cursor button right or left.
≥ Adjust while checking the picture in the viewfinder.
3 Select [ENTER] and press the button in the centre.
≥ Select [EXIT] and press the button in the centre or press the MENU button to complete the
setting.
40
VQT2Z66
[OFF]/[ON]
.
[OFF]/[ON]
[OFF]/
(Volume high)
] using the cursor button and press the button in the centre.
/