Panasonic HDC-MDH1 Operating Instructions Manual page 57

[ZEBRA]
Parts where white saturation (colour saturation) is likely to
occur (extremely brightly lit or shiny parts) are displayed with
diagonal lines (zebra pattern).
≥ Change the mode to
≥ Set the iA/MANUAL/FOCUS switch to manual mode.
(l 61)
: [RECORD SETUP] # [ZEBRA] # [ON]
MENU
≥ You can record an image with little white saturation if you
manually adjust the shutter speed or brightness (iris/gain)
(l 63).
≥ The zebra pattern does not appear on the images actually recorded.
[LUMINANCE]
Displays the luminance level of the centre of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance
level of the object, when recording same object in different surroundings.
Adjust the brightness using [IRIS]. (l 63)
≥ Change the mode to
≥ Set the iA/MANUAL/FOCUS switch to manual mode. (l 61)
: [RECORD SETUP] # [LUMINANCE] # desired setting
MENU
[OFF]:
Cancel the setting.
[ANYTIME]:
Constantly display.
[ON ADJUST]:
Display only when [IRIS] is adjusted. (l 63)
A Luminance display frame
B Luminance level
≥ Luminance level is displayed between [0%] and [99%]. It will be displayed as [99% ] when
it is over 99%.
≥ Luminance is displayed while adjusting [IRIS] even if [DISPLAY] is set to [OFF].
or .
or .
A Zebra pattern
50%
VQT2Z66
57