JVC LET0227-003A Instructions Manual page 25

• TINT
Adjust this if the appearance of flesh tone is
unnatural.
Available range: –16 to +16.
• SHARPNESS
Adjust this if the picture is indistinct.
Available range: 0 to +3.
• Y DELAY
Adjust this if the picture looks separately/
overlapped.
Available range: –2 to +2.
4
Press ENTER.
A window for setting parameters appears.
SATURATION + 4
Selected parameter
5
Press 5/∞ to adjust the level of the
parameter.
The higher value enhances the effect.
6
Press ENTER.
Repeat steps 3 to 6 if you want to set other
parameters.
To dismiss the VFP mode selection window
Press VFP.
NOTES
• The window for VFP mode selection and parameter
setting disappear if no operation is made for about 10
seconds.
• While zoomed, the VFP function cannot be used.
To simulate surround sound
(3D PHONIC)
Using the 3D PHONIC function, you can get a simulated
surround effect from your stereo system.
1
During playback, press 3D PHONIC.
The 3D PHONIC window appears on the TV screen.
2
Press 2/3 to select the desired mode.
Each time you press the button, the 3D PHONIC
mode changes as follows:
ACTION DRAMA THEATER NONE
Advanced operations
ACTION + 5 4
Selected effect mode
• ACTION
Suitable for action movies and sports programs in
which the sound source moves.
• DRAMA
Natural and warm sound. You can enjoy movies in
a relaxed mood.
• THEATER
You can enjoy sound effects like in a theater.
3
Press 5/∞ to adjust the effect level.
You can set the effect level from [1] to [5].
The higher value enhances the effect.
To dismiss the 3D PHONIC window
Press 3D PHONIC.
NOTES
• The 3D PHONIC window disappears if no operation is
made for about 10 seconds.
• The 3D PHONIC function works correctly only when
playing back a DVD VIDEO disc recorded with Dolby
Digital.
• When playing back a DVD VIDEO disc recorded with
Dolby Digital that does not contain the rear signal, you
can change the 3D PHONIC setting, but you will not be
able to achieve a correct 3D effect.
• The 3D PHONIC function does not affect the Dolby
Digital bitstream signal from the DIGITAL OUT jack.
• When the 3D PHONIC function is active, the [ANALOG
DOWN MIX] setting in the [AUDIO] setting display is
not available.
• [3D] is indicated on the display window when the 3D
PHONIC function is active.
23