Table of Contents
Advertisement
Locating a desired position in the
current title or track (Time search)
You can play a disc from the desired position by
specifying the time from the beginning of the current title
(for DVD VIDEO) or the disc (for SVCD/Video CD/Audio
CD).
For DVD VIDEO/Audio CD: During playback or while in
stop mode
For SVCD/Video CD: In any condition except SVCD/
Video CD playback with PBC
1
Press ON SCREEN twice.
The menu bar appears on the TV screen.
2
Press 2/3 to move
press ENTER.
The pull-down menu for entering time appears.
Screen example for DVD VIDEO
8.5Mbps
OFF
CHAP.
_:__:__
TIME
Screen example for Audio CD
OFF
PROG. RND.
__:__
TIME
3
Press the numeric buttons (0 to 9) to
enter the desired time.
The specified time is displayed in the pull-down
menu.
Example (for DVD VIDEO)
To play back from 2(H):34(M):00(S)
Press 2, 3, then 4.
TIME 2:34 __
Example (for SVCD/Video CD/Audio CD)
To play back from 23(M):40(S)
Press 2, 3, then 4.
TIME
You do not have to press "0" to enter the trailing
zeros (for the last two digits in the example above).
To correct a mistake
Press 2 repeatedly to move back to the digit where
you entered a wrong number, and reenter the correct
one.
4
Press ENTER.
The unit starts playback from the specified time.
to
, then
TITLE 33
CHAP 33
TOTAL 1:25:58
1/3
1/5
1/3
TRACK 33
TIME
25:58
:
23 4_
:
Advanced operations
To dismiss the menu bar
Press ON SCREEN.
Hint
"10" and "+10" buttons are not used with this function.
NOTES
• Some DVD VIDEO discs do not contain time
information, and the time search function cannot be
used.
• The time search function cannot be used during
program playback.
17
Advertisement
Table of Contents
