JVC LET0227-003A Instructions Manual page 7

Connecting to optional audio
equipment
Connecting to a stereo audio amplifier/
receiver
Connect the unit's AUDIO OUT (LEFT/RIGHT) jacks to
any line-level inputs (such as AUX, DVD, CD, etc.) of an
audio amplifier or receiver.
AUDIO (DVD) IN
RIGHT LEFT
Red
Audio cable (not supplied)
White
The unit
This illustration is upside down. (The bottom side is up.)
For details on the connectors' name, see page 38.
NOTE
Sound recorded on DTS-encoded DVD VIDEO or DTS-
encoded Audio CD discs are not output from the analog
(AUDIO OUT LEFT/RIGHT) jacks of the unit.
Connecting to a digital audio device
You can enjoy sound of enhanced quality by connecting
the unit's DIGITAL OUT (either OPTICAL or COAXIAL)
jack to a digital input of an amplifier, etc., using an optical
or coaxial digital cable. The digital audio signal on a disc
will be transferred directly from the unit. If the connected
digital audio equipment is a Dolby Digital or DTS
decoder or an amplifier with a built-in decoder, you can
enjoy high-quality surround sound.
NOTES
• Connect the unit and the digital audio device by using
either an optical digital cable or a coaxial digital cable.
• It is not recommended to use the digital jacks for
dubbing. When recording the sounds (DVD VIDEO,
SVCD, Video CD or Audio CD) played back on the unit,
record them through the analog jacks.
• Depending on the disc, no signal may be output from
the DIGITAL OUT. Make an analog connection in this
case.
• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO]
preference display correctly according to the
connected digital audio equipment. If setting made
for [DIGITAL AUDIO OUTPUT] is incorrect, loud
noise may be generated causing damage to the
speakers (see page 34).
Amplifier or
receiver
White
Red
Digital
equipment
Coaxial
digital cable
(not supplied)
Optical
digital
cable
(not
supplied)
The unit
When using the DIGITAL OUT (OPTICAL)
jack, remove the protection cap. Do not lose
the removed cap.
When the DIGITAL OUT (OPTICAL) jack is
not used, replace the protection cap in the
jack.
This illustration is upside down. (The bottom side is up.)
For details on the connectors' name, see page 38.
Preparations
AUDIO
RIGHT LEFT
Audio cable
(not supplied)
5