Figure 8-24.Flip Flex - Motorola Astro XTS 4000 Service Manual

8-18
8.7.1 Reassemble the Flip Assembly
To reassemble the flip assembly (A):
NOTE: Unless the Flip Flex (2) is replaced, otherwise, new adhesives must be applied using material
from the Field Service Kit – Adhesive (NNTN7189_) whenever any adhesive is removed from
the Flip Flex.
.
1
5
4
Adhering the Adhesive to Flip Flex – Overview
Item Motorola
No. Part number
1 1171646L01
2 7571858L01
3 1171845L01
4 1171857L01
5 1171645L01
1. Prepare adhesives surfaces of the Flip Assembly as described in first caution note of
"8.7 Radio Reassembly" on page
2
Item 5 align to
these 2 edges
3
Description
Adhesive, Flip Flex Seal 2
(Flip)
Pad, Conductive Foam
Adhesive, Flip Flex
Housing
Adhesive, Conductive
Adhesive, Flip Flex Seal 1
(Backer)
Figure 8–24. Flip Flex
Disassembly/Reassembly Procedures: Radio Reassembly
Item 4 align to
these 2 edges
B
This cut
indicate up
Adhesive Location – Front View
Items 2 align to
arrow marking & edge
Adhering the Adhesive to Flip Flex – Overview
8-17.
Item 1 align to
these 2 edges
Item 3 align to
legend marking
& edge
Section