Table 5-2. Test-Mode Displays - Motorola Astro XTS 4000 Service Manual

Performance Checks: Display Radio Test Mode
2. Within 10 seconds after "SELF TEST" is complete, press the Side Button five times in
succession.
The radio shows a series of displays that give information regarding various version numbers
and subscriber specific information. The displays are described in
Name of Display
" SERVICE
Host Software Version
DSP Software Version
EMC Secure Version
Encryption Type 1
Encryption Type 2
Model Number
Serial Number
ESN Number
ROM Size
FLASH Code
RF Band
Tuning Codeplug
Version
Processor Version
NOTE: All displays are temporary and will expire without any user intervention. If
Table 5–2. Test-Mode Displays
" The literal string indicates the radio has
entered test mode.
The version of host firmware is displayed.
The version of DSP firmware is displayed.
Version of the encryption hardware
Type of encryption being used
Type of encryption being used
The radio's model number as
programmed in the codeplug
The radio's serial number, as programmed
in the codeplug
The radio's Electronic Serial Number as
programmed in the codeplug
The memory capacity of the host FLASH
part
The FLASH codes as programmed in the
codeplug
The radio's RF band as programmed in
the Tuning codeplug
Version of the Tuning codeplug being
used
Version of the processor being used
information is longer than the physical length of the radio's display, the information
will wrap around to the next display. After the last display, "RF test" is displayed.
To freeze any of the displays, press the Left Navigation Button. To resume
automatic scrolling, press the Right Navigation Button. To rapidly scroll forward
through the displays, continue pressing the Right Navigation Button. You cannot
scroll backwards.
Description
Table 5–2.
Appears
Always
Always
Always
When the radio is secure
equipped
When the radio is secure
equipped
When the radio is secure
equipped
Always
Always
Always
Always
Always
Always
Always
Always
5-3