Installing And Using The External Modem - Alpha Technologies CFR 7.5K Operator's Manual

4 Communication

4.7 Installing and Using the External Modem

Uses of the External Modem
Where a network is not available, you can connect an external modem to the CFR's RS–232
port.
The modem lets you:
• Program the CFR to send an alarm message to a remote host via the telephone line
when a power event takes place.
• Dial up the CFR for remote monitoring or control. Once connected, all RS–232 menus are
accessible.
Equipment and Settings
Equipment:
• An external modem (US Robotics Sportster (1200, 9600, 19.2K or 28.8K baud) or
other "Hayes Compatible" modem).
• A standard null modem cable, DB–9 male to DB–25 male.
• Phone line access.
• One-time access to the CFR via a computer link.
Settings:
• RS–232 Speed: 1200 Baud between CFR and modem.
• RS–232 Signals: Rx, Tx and Gnd.
• Handshaking: None, neither hardware (RTS/CTS) nor software (XON/XOFF) are
used.
• Modem Speed: Same as the modem's.
52