Peripherals; Supported Auxiliary Hand-Held Scanner; Eas Devices; Scale Devices - Motorola MP6000 Integrator Manual

1 - 8 MP6000 INTEGRATOR GUIDE

Peripherals

The MP6000 supports the peripheral devices listed below.

Supported Auxiliary Hand-held Scanner

The MP6000 provides auxiliary data ports (USB and RS-232) to which a hand-held scanner can be connected.
NOTE An auxiliary cordless scanner, such as the LI4278, LS4278, or DS6878, can be attached to the MP6000. If
a presentation cradle is used with any of these scanners, a separate cradle power supply is required.
IMPORTANT The MP6000 scanner does not configure an auxiliary scanner. Auxiliary scanners must be

EAS Devices

•
Sensormatic AMB-9010 controller (available December 2014)
•
Sensormatic AMB-9010-IPS controller
•
Sensormatic ScanMax-Pro controller
•
Checkpoint controller
•
Checkpoint with interlock controller.
See Electronic Article Surveillance (EAS) on page 5-17

Scale Devices

•
OEM standard scale
•
Single/dual head Scale Displays.
•
Mettler-Toledo price computing scale for parts of Europe (available September 2014).

USB Flash Drives

•
Typical USB flash drive with Type A connector. (See

Customer Side Scanner (CSS)

•
The CSS (MX101) is an optional integrated device that supports 1D and 2D bar code scanning. The CSS
unit replaces the MP6000 tower cover, and can be installed on either side of the MP6000. Refer to the
MX101 PRODUCT REFERENCE GUIDE, p/n 72E-171320-xx, for installation and configuration
information.
configured separately, independently of the MP6000 scanner.
for detailed information.
USB Staging Flash Drive on page 5-11.)