Motorola MP6000 Integrator Manual page 170

5 - 24 MP6000 INTEGRATOR GUIDE
Beeper and LED Indicators (Continued)
Table 5-1
Condition Beeper Indication
Volume
Pressed and Annunciates volume
release level
Volume/Tone
button
Press and hold Annunciates decode
Volume/Tone tone
button for two
seconds
Decode tone Button click; decode
change beep at next tone
(wrap)
(Describes action
above)
System LED Button LED
Indication Indication
No change Button LED
blinks for two
seconds (at 2
Hz)
No change Button LED
blinks for two
seconds
No change No change
Description
Volume change: causes the current
volume level to be annunciated. If
pressed within two seconds of the
previous (or while volume LED is
blinking), it annunciates the volume
at the next level. Once the
maximum volume level is reached,
it wraps and begins at the lowest
volume level.
Decode tone changes
Subsequence decode tones are
heard every second if continuously
held. Decode tones cycle.
After holding the Volume button for
two seconds, the next decode tone
sounds. For each additional
second the decode tone changes
again.