Gioteck EX-0S Quick Setup Manual page 4

Set Up
(continued)
PAIRING AND CHAT SET UP
HEADSET
CONNECTOR
7 Plug the short Mini Jack Cable into the corresponding socket on the
Wireless Control Box.
8 Plug the other end of the short Mini Jack Cable into your controller.
9 Turn the Wireless Control Box ON
(The power switch is on the 'game' side of the Wireless Control Box).
10 Press and hold the mute button for 5 seconds.
11 The Wireless Receiver (A) and Wireless Control Box (B) LEDs will flash
repeatedly until paired – solid LED.
12 Make sure the microphone is not set to mute.
13 Go to XBOX Dashboard > Settings > Preferences > Voice.
14 Set the desired volume for the Game Sounds and Voice.
15 Set Voice Output to: Play through Headset.
16 You should now hear the sounds made by the XBOX through your headset.
17 To test the microphone go to messages and record and play back a message.
A
9
B
7 10
Page 3 of 11
8