Hold for 2 seconds. ‘For your Safety’ section This can also be used during before using this product. multi-connection of 2 devices. For technical assistance: LOW BATTERY All LED’s will flash Red www.gioteck.com/ once every minute. contact-support [Voice Prompt: Battery Low]...
Page 6
DISTANCE LESS THAN 10M / 33FT The EX1-RT headset has a range up to 10 metres (33 ft) from a device before audio degrades or loses connection. The Bluetooth word mark and Complies with logos are owned by the Bluetooth IDA Standards sig, inc.
Page 7
CHARGING The Power LED will be red during charging and all LED’s will light when charged. Charging indication will be delayed if the headset has not been used for a long time.
1. Ensure the headset is within 1 meter of the device. 2. Activate Bluetooth on the device (Settings >Bluetooth > ON) 3. With the EX1-RT Off, hold the Power button for 3 secs until all the LED’s illuminate to a solid state.
Terms and Conditions, and for • Do not allow the battery or Technical Assistance, go to : battery compartment to www.gioteck.com/ get into contact with metal contact-support objects such as keys or coins. • Charge the product as specified and only use the charger supplied.
Page 10
LEGAL This product complies with the following legal regulations. For further information go to www.gioteck.com This device complies with Industry a Class B digital device, pursuant Canada RSS 210 standard(s). to part 15 of the FCC Rules.These Operation is subject to the following...
Need help?
Do you have a question about the EX1-RT and is the answer not in the manual?
Questions and answers