Chevrolet Captiva OM C140 Manuals page 75

2. Locate the two lower anchor
positions.
The location of each lower
anchor is identified with a circular
marking on the lower edge of the
rear seatback.
3. Make sure there are no foreign
objects around lower anchors,
including safety belt buckles or
safety belts. Foreign objects can
interfere with the proper latching
of the child restraint to the
anchors.
4. Place the child restraint on the
seat over the two lower anchors
and attach it to the anchors
following the instructions supplied
with the child restraint.
5. Adjust and tighten the child
restraint according to the
instructions supplied with the
child restraint.
Caution
Unused child restraint system
could move forward.
Remove child restraint system if
not in use, or secure it with safety
belt.
Note
Since a safety belt or child restraint
system can become very hot if it is
left in a closed vehicle, be sure and
check the seat cover and buckles
before placing a child there.
Seats, restraints 73
{Warning
Use all ISOFIX low and top tether
anchorages for their designed
purpose only.
ISOFIX low and top tether
anchorages are designed only to
hold child restraints which come
equipped with low and top
anchorage attachments.
Do not use ISOFIX low and top
tether anchorages to hold adult
safety belts, harnesses, or other
items of equipment in your vehicle.
Using ISOFIX low and top tether
anchorages to hold adult safety
belts, harnesses, or other items or
equipment in your vehicle will not
provide adequate protection in the
case of a collision and could result
in injuries or even death.