Chevrolet Captiva OM C140 Manuals page 336

334 Vehicle care
Using the tire sealant and
compressor kit without sealant
inflate a tire (not punctured)
To use the air compressor to inflate a
tyre with air only and not sealant:
If a tyre goes flat, avoid further tyre
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers.
1. Remove the tyre sealant and
compressor kit from its storage
location.
2. Unwrap the air only hose (6) and
the power plug (8).
C11E5011A
3. Place the kit on the ground.
Make sure the tyre valve stem is
positioned close to the ground so
the hose will reach it.
4. Remove the tyre valve stem cap
by turning it counterclockwise.
5. Attach the air only hose (6) onto
the tyre valve stem and turn it
clockwise until tight.
6. Plug the power plug (8) into the
accessory power outlet in the
vehicle. Unplug all items from
other accessory power outlets.
If the vehicle has an accessory
power outlet, do not use the
cigarette lighter.
If the vehicle only has a cigarette
lighter, use the cigarette lighter.
Do not pinch the power plug cord
in the door or window.
7. Start the vehicle. The vehicle
must be running while using the
air compressor.
C11E5012A
8. Turn the selector switch (3)
clockwise to the Air Only position.
9. Press the on/off (4) button to turn
the compressor on.
The compressor will inflate the
tyre with air only.