Chevrolet Captiva OM C140 Manuals page 210

208 Infotainment system
Route plan
Picture 4.1 Route Plan
With A-Navi system you can enter
the desired destination and also
specify how the route to be
calculated.
A-Navi System enables to set two
waypoints during navigation. The
system calculates a proposed route
according to the sequence of the
waypoints you specified, and guides
you to the final destination.
After you enter
waypoints/destination, the system
enter "Route Plan" screen. This
chapter will describe all the functions
of this screen.
1. Destination management
(1) Add or delete destination(s)
A-Navi System allows you to add up
to two waypoints and destinations.
Usually the start point is the
GPS-fixed current position.
+ Add: touch it and enter "Search
Menu" to search waypoint/
destination.
P41
- Delete: touch it and the highlight
waypoint/destination in yellow is
deleted.
(2) Change the sequence of
destination
w: touch it to move up the highlight
waypoint/destination.
x: touch it to move down the
highlight waypoint/destination.
Gray key means the function is
disabled.
(3) Display destination on map
Picture 4.2 Destination on Map
• In "Route Plan" screen, touch
"On Map" and enter the map
location of the highlight
waypoint/destination. Here allow
you:
A. To pin on map and check
information of the
waypoint/destination.
P42