Chevrolet Captiva OM C140 Manuals page 333

1. Remove the tyre sealant and
compressor kit from its storage
location.
2. Unwrap the sealant/air hose (7)
and the power plug (8).
3. Place the kit on the ground.
Make sure the tyre valve stem is
positioned close to the ground so
the hose will reach it.
4. Remove the valve stem cap from
the flat tyre by turning it
counterclockwise.
C11E5011A
5. Attach the sealant/air hose (7)
onto the tyre valve stem. Turn it
clockwise until it is tight.
6. Plug the power plug (8) into the
accessory power outlet in the
vehicle. Unplug all items from
other accessory power outlets.
If the vehicle has an accessory
power outlet, do not use the cigarette
lighter.
If the vehicle only has a cigarette
lighter, use the cigarette lighter.
Do not pinch the power plug cord in
the door or window.
C11E5012A
7. Start the vehicle. The vehicle
must be running while using the
air compressor.
8. Turn the selector switch (3)
counterclockwise to the Sealant +
Air position.
9. Press the on/off (4) button to turn
the tyre sealant and compressor
kit on.
Vehicle care 331
2290817