Chevrolet Captiva OM C140 Manuals page 302

300 Vehicle care
After you change the oil, the oil life
monitor will need to be reset. See an
authorised repairer for service.
How to Reset the Engine Oil Life
System
The engine oil life system calculates
when to change your engine oil and
filter based on vehicle use. Anytime
your oil is changed, reset the system
so it can calculate when the next oil
change is required.
To reset the engine oil life system, do
one of the following:
 Using the scan tool.
Your authorised repairer will
reset the system using scan tool
after changing the engine oil.
Consult a repairer.
 Using accelerator pedal
Petrol engine
1. Turn the ignition key to
ON/START with the engine off.
2. Fully press and release the
accelerator pedal three times
within five seconds.
3. Turn the key to LOCK.
If the change engine oil lamp comes
back on and stays on when you start
your vehicle, the engine oil life
system has not reset. Repeat the
procedure.
Diesel engine
1. Remove key from ignition switch
for more than one minute. Then
turn on ignition key (do not start
engine).
2. Perform the following procedure:
2-1. Press the accelerator pedal
to the floor and hold it on the
floor for 2 seconds.
2-2. Release the accelerator
pedal and take your foot off
of the pedal for 2 seconds.
2-3. Repeat this sequence (1, 2)
two more times (for a total of
three times) within one
minute.
If the change engine oil lamp comes
back on and stays on when you start
your vehicle, the engine oil life
system has not reset. Repeat the
procedure.