Miele H 310 Operating Instructions Manual page 48

Cleaning and care
Remove the catalytic back panel,
side liners (if fitted) and roof liner be-
fore using oven sprays. The chemi-
cals used in oven sprays will dam-
age catalytic enamel rendering it
ineffective.
Apply a spray oven cleaner to the
soiled areas. Leave to take effect for a
couple of minutes only!
If necessary use a soft sponge (e.g. the
Vileda sponge as supplied with the
oven), soft nylon brush or a scraper
suitable for glass surfaces to loosen the
soiling.
Repeat the process if necessary.
After cleaning rinse thoroughly with
clean water and then dry thoroughly.
Important
For optimum performance of the
PerfectClean enamel it is important to
clean the oven and accessories after
each use.
The surfaces will become harder to
clean and the anti-stick properties
will deteriorate if soiling is not re-
moved after each use and allowed to
build-up. In extreme cases cleaning
may even become impossible.
48
The following cause lasting damage
to the surface structure and reduce
the anti-stick effect and must not be
used on PerfectClean surfaces:
– abrasive cleaning agents
– wire wool or metal scourers
– pot scourers
– oven cleaning pads
– sponges and cloths which have
previously been used with
abrasive cleaning agents.
– oven spray must not be used in a
hot oven or left on for too long.
– items coated with PerfectClean
enamelling must not be cleaned
in a dishwasher.
Note
Soiling such as spilt juices and cake
mixtures are best removed whilst the
oven or tray is still warm. Exercise cau-
tion, make sure the oven is not hot -
danger of burning!
Spilt fruit juices may cause lasting dis-
colouration of the surfaces and roasting
can cause matt areas to appear. Clean
these following the instructions given
above and do not try and use force to
remove them! This discolouration is
permanent but will not affect the effi-
ciency of the enamel.
When baking items with a high salt con-
tent (e.g. continental pretzels) place
them on baking parchment in the bak-
ing tray or grill pan. Sodium deposits
can cause lasting discolouration to
PerfectClean surfaces.