Connecting To The Base Station Via Modem; Modem Speed And Compatibility Issues - Spacelabs 90207 Operation Manual

Connecting to the Base Station via Modem

For a modem connection to a remote IBM XT/AT/PS2 (or equivalent) base station, refer to Figure 1-3
below.
Note:
The actual initialization procedure is discussed in the 90121 ABP Report Management System
Operations Manual (P/N 070-0529-xx) and in the 92506 ABP Report Management System Client
Application Operations Manual (P/N 070-0932-xx).

Modem Speed and Compatibility Issues

The 90207 and 90217 monitors operate Hayes-compatible modems only. You can identify your model
type by plugging the communications cable into your 90207/90217 monitor and looking at the numbers
on the display. The acceptable modem types and maximum speeds of 90207/90217 monitors are sum-
marized below:
Model Type
older 90207
90207-Q
older 90217
90217-Q
Connection Procedure
1. Set the switches on the modem if you are using an older 90207 monitor with a 1200
modem, as follows:
1-4
Operation
Figure 1-3: Modem connection confi guration
Table 1: 90207/90217 Acceptable Modem Speeds
Max Speed
1200
1200
up to 9600
9600
Switch Number
1
2
3
4
5
6
7
8
9
10
90207/90217 Operations Manual
Modems Accepted
1200 only
any Hayes
up to 9600
any Hayes
Setting at Monitor Site
down
up
down
down
down
up
up
down
up
up
Display
9999
1999/9999
2999/9999
0999/9999