Initializing The Monitor; Connecting Directly To A Local Report Generator; Connecting Directly To The Pc Interface - Spacelabs 90207 Operation Manual

Initializing the Monitor

The ABP monitors must be initialized prior to the start of patient monitoring. Initialization specifi es the
monitoring period, patient information, time format, measurement interval, monitor tone ON/OFF dur-
ing selected periods, event code display, and whether or not to display pressure values. To initialize
the monitor, connect it to one of the following analysis systems.

Connecting Directly to a Local Report Generator

For a direct connection to the 90207 or to the 90217 monitor, place the monitor into the chute on the
Report Generator (Model 90239A or equivalent), as displayed in Report Generator .

Connecting Directly to the PC Interface

For a direct connection to a PC-compatible computer via a Model 90121 or 92506:
1 Connect one end of the ABP interface cable to the serial port on the computer where the
90121 or 92506 software is installed.
2 Connect the other end of the interface cable to the ABP monitor.
Refer to the 90121 ABP Report Management System Operations Manual (P/N 070-0529-xx) or the
92506 ABP Report Management System Client Application Operations Manual (P/N 070-0932-xx) for
more information on the report management system.
Operation
Figure 1-1: Report Generator
Figure 1-2: PC interface direct connect confi guration
070-0137-03 Rev.L
1-3