Advertisement
Control windows
[Pan/Tilt/Zoom] control window
The sub-window shown below can be used for the control of panning, tilting,
zooming and position movement.
The VN-C30U unit incorporates a position memory storing up to 10 pan/tilt
positions used in image capturing. Clicking one of the 10 (No.) buttons enables
the camera to start the pan/tilt operation to the corresponding position stored
in the memory. When the mouse pointer is placed over the Move Position
button, the Pan/Tilt/Zoom location of each position will be displayed in Alt.
The pan/tilt position can be changed using these 8 pan/tilt control buttons.
The amount of movement per press of a pan/tilt button is the "Angle Step".
The current [Zoom Step] and [Angle
Step] settings for the pan/tilt operation
are displayed.
Either setting can be changed by
entering the desired angle value
(integer) and clicking on the <Apply>
button.
CAUTION
Do not execute the pan/tilt operation until the web browser has completed
loading the images of all the buttons.
16
The lens zooming can be changed
using these two buttons. The amount
of lens movement per press of the
button is the "Zoom Step".
Advertisement
