Canon PIXMA MP150 Service Manual page 13

<Destination setting procedures>
At Logic board replacement, make settings for each destination.
The number of the Reset
button pressing
0 time
1 time
2 times
3 times
4 times
5 times
6 or more times
<Waste ink counter reset procedures>
At the waste ink absorber replacement, reset the waste ink counter for the replaced waste ink absorber.
Setting operation for the waste ink counter (The counter setting value is selected by pressing the Reset button.)
The number of the Reset button
pressing
0 time
1 time
2 times
<Button / LCD checking operation procedures>
At Operation panel unit replacement, check the button / LCD.
1. When pressing the Stop button two times, the machine will be moved into an LED confirmation mode.
2. As often as the Color button is pressed one time, each LED is lit one by one, and the machine get in the mode in which each
button is acceptable.
3. As often as each buttons on the panel is pressed from the left to the right, the displayed number is counted up.
Pressed button
Maintenance
Fit to Page
SCAN
Paper size
+
Black
Color
Stop / Reset
On / Off
4. When all buttons are pressed, [1] will be displayed. Then, LED[8.5 x 11 Plain Paper] and LED[8.5 x 11 Photo Paper] will be lit on
the panel, and the machine will be in a service mode menu selection mode.
LED
Green No change
Orange Japan
Green Korea
Orange US/Canada
Green Europe
Orange Australia
Returns to a menu selection
LED
Green Reset the main waste ink counter to 0%.
Orange Reset the platen waste ink counter to 0%.
Green Reset the Main & platen waste ink counter to 0%. (Reset
collectively.)
Display
1
2
3
4
5
6
7
8
9
Destination
(12/24)
Paper for defaulte setting
A4
A4
Letter
A4
A4
A4