1
ShoreTel Mobility Router 6000 Installation
Connecting to the Network
1.6
Connecting to the Network
Connect the Mobility Router to a network device, such as a switch, using the straight-through
Ethernet cable provided with the Mobility Router.
To connect the Mobility Router to the network:
1
Insert one end of the Ethernet cable to the network device.
2
Insert the other end of the Ethernet cable to the left Ethernet port (ETH0) on the rear of
the Mobility Router.
NOTE
(ETH1) to the external network.
Figure 1-6. Connecting the Ethernet Cable to the Mobility Router
8
ShoreTel Mobility Router 6000 Series Hardware Installation Guide
If using the Secure Remote Voice feature, connect the second Ethernet port