Connecting To The Network - ShoreTel Mobility Router 4000 Hardware Installation Manual

1.6

Connecting to the Network

Connect the Mobility Router to a network device, such as a switch, using the straight-through
Ethernet cable provided with the Mobility Router.
To connect the Mobility Router to the network:
1
Insert one end of the Ethernet cable to the network device.
2
Insert the other end of the Ethernet cable to the left Ethernet port (ETH0) on the rear of
the Mobility Router.
NOTE
(ETH1) to the external network.
Figure 1-5. Connecting the Ethernet Cable to the Mobility Router
ShoreTel Mobility Router 4000 Series Hardware Installation Guide
ShoreTel Mobility Router 4000 Installation
If using the Secure Remote Voice feature, connect the second Ethernet port
Connecting to the Network
1
7