Table of Contents
Advertisement
4
Place the other rack rail on the other side of the rack, making sure of the following:
Sliding rail is at the same level as the rack rail attached in Step 3.
Sliding rail guide faces the inside of the rack.
End of the rail labeled "Front" is at the front of the rack.
End of the rail labeled "Back" is at the back of the rack.
5
Attach the rack rail to the rack by inserting screws in the brackets at the ends of the rack
rail.
1.5.4 Installing the Mobility Router into the Rack
To install the Mobility Router into the rack:
1
Align the back of the Mobility Router with the front of the rack rails in the rack.
2
Slowly slide the Mobility Router rails into the rack rails, using even pressure on both
sides. Press on the locking tabs of the Mobility Router rails while sliding it, if necessary.
3
Keep sliding the Mobility Router until there is an audible click. This indicates the
Mobility Router has been completely inserted into the rack.
4
Insert screws in the mounting brackets on the front of the Mobility Router to the rack.
Figure 1-5. Installing the Mobility Router into the Rack
ShoreTel Mobility Router 6000 Series Hardware Installation Guide
ShoreTel Mobility Router 6000 Installation
Installing the Mobility Router
1
7
Advertisement
Table of Contents
