Table of Contents
Advertisement
Chapter
1
The IBM 6400-D Generation II Series Printer
An attention notice indicates the possibility of damage to a program,
device, system, or data.
Important draws your attention to information vital to proper operation
of the printer.
NOTE: A note gives you helpful tips about printer operation.
Format Conventions
Key names, indicator names, and messages that appear on the operator
panel display are capitalized as they actually appear on the printer. Key
names are shown in bold. For example:
Press the Start key. The Attention indicator will light.
Related Documents
For more information about your printer, refer to the following documents:
•
IBM 6400-D Series Line Matrix Printer Operator's Guide — Includes step-
by-step instructions on daily printer operations.
•
IBM 6400 Line Matrix Printer Safety Information — Provides translated
safety notices.
•
IBM 6400 Line Matrix Printer Maintenance Information Manual —
Explains how to maintain and repair the 6400 line matrix printer at the
field service level of maintenance. This manual covers alignments and
adjustments, preventive and corrective maintenance, troubleshooting,
and basic principles of operation.
•
IBM 6400-D Generation II Series LQ-1600K Programmer's Reference
Manual — Provides descriptions of LQ-1600K printer codes and
character sets.
•
IBM 6400-D Generation II Series KS Programmer's Reference Manual —
Provides descriptions of KS printer codes and character codes.
•
IBM 6400-D Generation II Series KSSM Programmer's Reference Manual
— Provides descriptions of KSSM printer codes and character codes.
The IBM 6400-D Generation II Series Printer
The IBM 6400-D Generation II Series printers offer software versatility and the
latest refinements in line matrix printing technology.
Either LQ-1600K, KS, or KSSM will be the standard emulation. To load all of
the configuration parameters (forms length, line spacing, etc.), simply power
on the printer.
You can easily switch to any set of configuration parameters by using the
recall custom set feature from the operator panel. You can also switch
emulations by using the operator panel keys.
12
ATTENTION
IMPORTANT
Advertisement
Table of Contents
