Electrical Wiring; Sequence Of Operation - Dunkirk XEB-2 Installation Instructions Manual

Turn off electric power at fuse box before making any
line voltage connections. Follow local electrical codes.

Electrical Wiring

Sequence of Operation

The thermostat location has an important effect on the
operation of your boiler system. BE SURE TO FOLLOW THE
INSTRUCTIONS INCLUDED WITH YOUR THERMOSTAT
Locate the thermostat about five feet above the floor on an
inside wall. It may be mounted directly on the wall or on a
vertically mounted outlet box. It should be sensing average
room temperature, so avoid the following:
DEAD SPOTS:
Behind doors
Corners and alcoves
HOT SPOTS:
Concealed pipes
Fireplace
TV sets
Radios
Lamps
Direct sunlight
Kitchens
COLD SPOTS:
Concealed pipes or ducts
Stairwells - drafts
Doors - drafts
Unheated room on other side of wall
Set heat anticipator at .2 amps. 24 volt thermostat connects
to aquastat terminals T and T