26
Call answer
You have an incoming call when your IP Deskphone rings and the light flashes or when an
intercom or line soft key indicator flashes.
Answering a call
1
When you have an incoming call, perform one of the following:
•
Lift the handset.
•
Press the line or intercom key with the flashing indicator, and then lift the handset.
When certain features are active such as the Do Not Disturb feature, you must press the hold
key to answer an incoming call.
Call hold
Calls are placed on hold automatically when you switch from one line to another.
Placing a call on hold
1
While a call is active, press
The indicator for the line on hold flashes.
2
To return to the call, press the line key with the flashing
Handsfree
To use the handsfree feature, perform one of the following tasks:
•
Press
•
To switch to handsfree when you are on a handset call, press
replace the handset. Lift the handset to switch back.
•
To switch to handsfree when you are on a headset call, press
Press
Headset
You must have a headset installed on your telephone to use this feature.To use your headset,
perform one of the following tasks:
•
Press
on, press a line or intercom soft key to make a call.
•
To switch to your headset when you are on a handset call, press
replace the handset. Lift the handset to switch back.
NN40050-111
(Hold).
(Handsfree) to make or answer a call.
(Headset) to switch back.
(Headset) to activate the headset mode. When the Headset LED indicator is
S
indicator.
(Handsfree) and
(Handsfree)
(Headset) and
Chapter 3