Quick Start Instructions - Moultrie M-1100i Instructions Manual

VIII
TIME LAPSE SOFTWARE
SOFTWARE INSTALLATION
Download your free Time Lapse software at www.moultriefeeders.com/timelapsesoftware
B
PLOTSTALKER ACTIVITY SEARCH
INTRODUCTION
ACTIVITY SEARCH
In time-lapse photography a series
The Search Feature will scan through your photos and automatically
of still photos are taken at regular
look for changes in regions that you identify in Setup.
time intervals. The PlotStalker
In search mode, the PlotStalker software scans through the .mlt photo file, stops Software allows you to load the
time lapse file that was captured
on a photo when changes are found in your identified region, and then highlights
from your Moultrie Game Camera
the changes in blue. You can click anywhere in the video viewing area to remove
and scroll backward and forward
the blue highlights.
through your photos, single step,
search for activity in a designated
ACTIVITY SEARCH SETUP
area, and save the files.
Click the Settings button to activate
the Region and Sensitivity settings
for the Activity Search
SYSTEM REQUIREMENTS
Computer: Intel® Pentium® 4 or AMD Athlon® 64 processor or above; 1GB RAM minimum;
100 MB hard disk space minimum.
DEFINE SEARCH REGION
Provides the ability to search for
Operating System: Microsoft® Windows® 32 bit - XP with Service Pack 2 or later; Windows Vista®
changes in the photo in a specific
Home Premium, Business, Ultimate, or Enterprise with Service Pack 1;
region rather than the entire photo.
Windows 7
Click on the Set Motion Search Area Button.
1
Download Images
Use the mouse to select and drag the red outline around the area you want to
2 1. Double-click on Time Lapse
search for movement. This allows you to focus on a very precise area if
Icon to open the software.
required.
2. Click on File -> Open Photo Folder
3. Browse through your files to
Click OK button on the Settings Popup window to confirm your settings and
3
the folder where the images you
exit the menu.
wish to view are stored.
SENSITIVITY
4. Once the folder is selected, click OK.
Set to High, Medium or Low - This sets the level of pixel change the program
1
5. The images saved in the folder are
will detect. Note; a pixel change will occur with a color, intensity, lighting or
now available to view through
movement so this setting is critical to obtain the desired results.
the Time Lapse Software.
DEFAULT SETTINGS
Click on Default button to return to the default values for Search Area and
1
Page 16
Time Lapse Software
Sensitivity settings.
GPS Latitude - 000.000000 N
II

QUICK START INSTRUCTIONS

Use the steps below as a guide to quickly set up your camera so it will function using the factory
default settings.
STEP 1
Open camera cover. Press the battery chamber release button. Install eight (8) AA size alkaline or
lithium batteries with polarities as indicated in the Battery Tray. Re-install the Battery Tray and insert
your SD card. We recommend that you format the SD card (ERASE IMAGES) inside the camera before Slide the UNLOCK switch on the bottom of Camera and use the knob to pull the
taking pictures.
slide-out Battery Tray. Install or eight(8) AA size alkaline or lithium batteries
with polarities as indicated in the Battery Tray. Re-install the Battery Tray.
STEP 2
Insert SD Memory Card until you hear an audible click. Camera will not operate without SD Card.
Thread the provided Mounting Strap through the Eyelets on the back of the
Slide the power switch to ON. Press the Menu button to switch the camera to Setup, then press the
camera and secure to a tree or pole approximately 36" from the ground as shown.
Right Button to set the time and date. (See details on page 7.)
Turn Camera on by sliding ON/OFF/IR TEST switch
STEP 3
to the ON position.
Mount camera in desired location using a mounting
strap. NOTE: Camera must be attached to a stable
Press the MODE button one time to get to the
object for motion detection to function properly.
Camera Setup Menu. Set Time and Date by pressing
ENTER, using UP/DOWN to adjust selected field,
STEP 4
LEFT/RIGHT to move to the next field and ENTER
Switch camera to IR Aim. Aim camera using motion
when done.
detection to determine target area. Walk in front of the
camera at the desired distance and the camera LED will
Press MODE button until MENU SELECTION
flash showing the covered area. Switch camera to ON.
screen is displayed. Use the UP/DOWN buttons
until the MAIN SCREEN option is highlighted
STEP 5
yellow. Press ENTER.
Slide the power switch to ON. Close cover. The camera
will operate using Default settings. You may also
Your Camera will now automatically take pictures
customize the settings if desired.
whenever an animal is detected in range -based on
the default settings below.
Capture Mode
Photo Quality
Photo Delay after each photo is taken
Motion Freeze
Multi Shot Count
Video Resolution
Video Length
Video Audio
Camera Name
Temperature
Info Strip printed on photos
Plot Frequency
Plot Duration
GPS Longitude & Latitude:
Default Setting
M-1100i Digital Game Camera
Delete All?
Eyelet
Mounting
Strap
TRAIL CAM (Still)
2.0 MP
5 SEC
ON
OFF
VGA
5 SEC
ON
MOULTRIECAM
FAHRENHEIT
ON
15 SECONDS
3 HOUR
000.000000 N / 000.000000 W
Page 5
NO
NO