Table of Contents
Advertisement
H
SETTING PHOTO/VIDEO OPTIONS (cont.)
Setting Motion Freeze
This feature maximizes the image clarity during night photos. When this feature is on the
camera will adjust the exposure time to reduce blur associated with motion. Other
adjustments are made to increase the brightness and clarity of the photo. When this
feature is turned off the camera will use a maximum exposure time that will not reduce
blur, but will increase the effective flash range and image brightness of night photos.
Setting Video Quality
Choose between 2 image quality settings:
1. HD:
1280 x 720
2. FULL HD:
1920 x 1080
Setting Video Length
Choose between 5 video length settings (5, 10, 30, 60 or 90 seconds).
NOTE: Night videos are limited to a maximum of 30 seconds.
12
B
QUICK START INSTRUCTIONS
Use the steps below as a guide to quickly set up your camera so it will function using the factory default settings.
PHOTO/VIDEO SETTINGS
MOTION FREEZE
STEP 1
Open camera cover. Install twelve (12) AA size alkaline or lithium batteries with polarities as indicated in the Battery Tray. Insert your SD card. We
X
On (Fast Flash)
recommend that you erase the SD card (ERASE IMAGES) inside the camera before taking pictures: this will not only erase all images, but will also
Off (Max. Flash)
format your SD card for use in the camera. Camera will not operate without SD card. Switch camera to Quick Start.
NOTE: On (Fast Flash) reduces
STEP 2
image blur, but also reduces
flash range.
Mount camera in desired location using a mounting strap. The camera also has two Python™
Cable Loops for added security. NOTE: Camera must be attached to a stable object for
motion detection to function properly. Mounting camera on an unstable structure may
PHOTO/VIDEO SETTINGS
result in excess image captures with no subject (false triggers).
VIDEO RESOLUTION
STEP 3
HD (1280 x 720)
Switch camera to Aim. Aim camera using motion detection to determine target area.
X
FHD (1920 x 1080)
Walk in front of the camera at the desired distance and the camera LED will flash,
showing the covered area which can be seen using Live View on the TFT screen.
STEP 4
Close cover. The camera will operate using Default settings. You may also
customize the settings if desired in Custom Start.
PHOTO/VIDEO SETTINGS
Setting Run Mode
VIDEO LENGTH
When you choose Quick Start, the only settings
that you will be able to change will be Date and
90 seconds
60 seconds
Time, allowing for rapid setup. Other settings are:
30 seconds
X
10 seconds
5 seconds
OPTION
SETTING
Mode
Motion Detect
Detection Delay
30 seconds
Python™ Cable
Multi-Shot
3-Triggered
Loops
Photo or Video
Photo
Eyelet
Mounting
Strap
5
Hide quick links:
Advertisement
Table of Contents
