A
QUICK START INSTRUCTIONS
Battery Installation
Open the camera cover and install 6 AA Alkaline or Lithium batteries. Make sure that the (+ and -) polarities match the polarities indicated
inside the battery chamber.
Note: Anytime you load or unload batteries, make sure that the camera is OFF.
Insert SD Card
You will need to open the front cover to insert an SD memory card. You can insert a
SD Card up to 32 GB (not included). Insert the SD card in the direction indicated on the
card, until you hear an audible click.
Note: Camera will not operate without an SD memory card installed.
Ultra/turbo SD cards are not recommended.
Power ON
Slide the Mode Switch to the Setup position. The time will appear on the
LCD Display. The camera has powered up.
2
MCG-13200_Game Spy 2 Plus (2017) manual_ENGLISH_2-3-17.indd 2
2/3/17 11:09 AM