Hardware Specifi Cations - TDS Recon Getting Started Manual

Shock
The Recon is designed to resist damage for drops up to 122 cm (4 ft).
However, you should protect the display from impact, pressure, or
abrasive substances that can scratch it or crack it. The Recon should
not be dropped unnecessarily.
Care of the touch screen
Abrasives may scratch touch screens. Keep the touch screen clean
by gently wiping the display, using a soft cloth dampened either with
clean water or glass cleaner. Do not apply any cleaner directly to the
display. Do not use any abrasive cleaners.
Applying screen protectors
Use the screen protectors included with the Recon to keep the touch
screen clean and protected. To apply a screen protector, fi rst clean the
display thoroughly. Peel the backing from the screen protector. Align
the edge, then drop the remainder onto the display. Use a credit card, if
necessary, to squeegee the air from underneath the screen protector.
Temperature Range
Although the Recon is designed to be rugged, do not leave it in direct
sunlight or a parked vehicle in the sunlight for extended periods.
Operating temperature
Storage temperature
Hardware Specifi cations
Features
Operating System
Processor
Memory
Storage
Display
Batteries
I/O
1
Storing the PowerBoot in long-term temperatures above 35C (95°F) may shorten battery life.
-22°F to +140°F (-30C to +60C)
-40°F to +158°F (-40C to +70C)
1
Recon Series
Microsoft Pocket PC 2003
200 MHz or 400 MHz XScale
64 MB SDRAM
64 or 128 MB non-volatile Flash
1/4 VGA color TFT with LED frontlight
NiMH rechargeable pack
9-pin D-shell RS232 serial, USB, charging port
21