Safe Use Of Your Recon - TDS Recon Getting Started Manual

Safe Use of your Recon

Repair
Please do not attempt to dismantle the Recon for repair. There are no
user-serviceable parts inside. For service, please use the contact details
listed on the last page of this manual or your local dealer for assistance.
Obtaining an additional PowerBoot Module
Replacement PowerBoot Modules are available. See the contact
details listed on the last page of this manual.
Battery safety
• To reduce the risk of fi re or burns, do not disassemble, mutilate, or
puncture the PowerBoot Module. There are no user-serviceable parts
inside.
• Handle a damaged or leaking battery with extreme care. If the electrolyte
comes in contact with your skin, wash the exposed area with soap and
water. If it comes in contact with the eye, fl ush the eye with water for 15
minutes and seek medical attention.
• Do not expose the PowerBoot Module to storage temperatures above
35C (95°F) for extended periods.
• Do not charge the PowerBoot Module if the ambient temperature
exceeds 35C (95°F) or is below 0C (32°F).
• Contact your local waste disposal provider regarding the disposal or
recycling of the PowerBoot Module.
Environmental Hazards
The Recon contains no mercury or cadmium.
AC adapter safety
• Use only AC adaptors intended for the Recon. Using any other external
power source can damage your product and may void your warranty.
• Make certain that the input voltage on the adapter matches the
voltage in your location.
• Make certain that the adapter has prongs compatible with your
outlets.
• AC adaptors are designed for indoor use only. Avoid using the AC
adaptor in wet, outdoor areas.
• Unplug the AC adaptor from power when not in use.
• Do not short the output connector.
22