Unaligned Projected Image - SMART Board 680iv Configuration And User's Manual

C H A P T E R 6
Troubleshooting your interactive whiteboard system

Unaligned projected image

The SMART V25 projector image can slip if the projector is moved often or installed in a location
prone to vibration, such as next to a heavy door. Follow these precautions to help prevent the image
from becoming misaligned:
Make sure that the installation wall is plumb and square and doesn't move or vibrate
l
excessively.
Make sure that there are no obstructions behind the projector's wall-mounting bracket, and that
l
the bracket is firmly secured to the wall according to the installation instructions.
Make sure that the knob and locking screw are tight.
l
Confirm that all cables are held in place with the appropriate cable clip.
l
Adjust the projected image. See the included installation instructions for the SMART Board
l
480iv and 680iv interactive whiteboard system (smarttech.com/kb/153153) and Adjusting the
image on page 23.
52