SMART Board 680iv Configuration And User's Manual page 27

C H A P T E R 3
Using your interactive whiteboard system
Setting Use
White Peaking Adjusts the image color brightness
from 0 to 10 while providing more
vibrant white shades.
Degamma Adjusts the color performance of the
display from 0 to 3.
Color Adjusts the Red, Green, Blue, Cyan,
Magenta and Yellow colors on the
projector from 0 to 100 to provide
custom color and luminance output.
Audio menu
Volume Increases and decreases the
projector's volume from 0 to 40.
Mute Mutes the projector's audio output.
Disable Volume Disables the projector's volume
Control control.
Closed Captioning Turns closed captioning on or off.
Closed Captioning Sets the closed captioning language to
Language CC1 or CC2.
17
Notes
A value closer to 0 creates a natural
image and a value closer to 10
enhances brightness.
Each color has a default value of 100.
Adjustments to the color settings
register under the User mode.
The default is 20.
If you mute the projector's audio output
and then increase or decrease the
volume, the volume is restored
automatically. You can prevent this
from happening by disabling the volume
control.
Typically, CC1 displays American
English subtitles, while CC2 displays
other regional languages, such as
French or Spanish, depending on
television channel or media setup.