Honeywell Evohome Installation Manual page 20

Controller

Hide thumbs Also See for Evohome:

Remote Access Gateway (RFG100)

If the Gateway was in the

Connected Pack with

evohome, it is already

bound and there is no

need follow these binding

instructions.

evohome

Controller

If you are NOT following

GUIDED CONFIGURATION

follow these steps on your

evohome Controller display

first:

1. Press and hold "Settings"

for 3 seconds

2. Press the green tick

3. Select ADD GATEWAY

Step 3: Power up and bind devices

Power up and bind a Remote Access

Gateway (RFG100)

Connect the Gateway to the power

supply and turn on the power.

To bind the Remote Access Gateway (RFG100)

Press and hold the button on the base of the gateway

unit until you see a flashing light next to the

On the evohome Controller press

the green bind button

You should receive a SUCCESS message on the

evohome Controller (if not go back and re-bind)

Now you need to set up a user account

and download the smartphone app.

Go to www.mytotalconnectcomfort.com and follow the

instructions there.

Table of Contents