Honeywell Evohome Installation Manual page 12

Controller

Hide thumbs Also See for Evohome:

Powering up your evohome Controller

Your evohome Controller

comes with *rechargeable

batteries which are pre-

charged allowing you to set-

up the system while off the

table stand or wall bracket.

Place the evohome

Controller on the table

stand or wall bracket

for normal use.

*Only use the

AA rechargeable

batteries provided

Step 2: Set up your Central Controller

First, power up the evohome Controller

Remove the cover, remove the battery

tab and replace the cover

Place it on the table stand or wall bracket

Once the batteries are fully charged, the evohome

Controller can be easily removed from the table stand or

wall bracket for ease of programming. After 30 minutes

the evohome Controller will emit a beep to indicate that

it should be replaced on the stand or wall bracket

PUll TAB

Table of Contents